Marvin's three collections, in plain terms.
Marvin groups its window line into three collections. Essential is built entirely from Ultrex fiberglass and sits at the bottom of the range. Elevate pairs a wood interior with a fiberglass exterior, trading some of the wood look for lower upkeep. Signature is the premium tier: full wood or aluminum-clad-wood construction, with the most configuration options and the widest price spread (Marvin, as of July 2026).
The collection you land on usually comes down to maintenance tolerance and budget, not aesthetics alone. Essential and Elevate both use fiberglass somewhere in the assembly, which resists swelling and rot better than solid wood. Signature keeps the full wood or clad-wood look for buyers who want it and are willing to pay for it.
Installed price vs. unit price.
Cost guides usually quote an installed price, meaning the window plus labor. Today's Homeowner puts the window alone, before installation, at $900 to $1,600, as of July 2026. Installation then adds $100 to $500 per opening depending on size and whether one installer or two is needed (Modernize, as of July 2026). A quote that looks low may be unit-only; ask which number you are seeing before comparing brands.
What moves the price inside a collection.
Size is the biggest lever. A small egress or accent window prices well below a large picture unit in the same collection. Glass package matters too: upgrading from standard to Low-E glass adds roughly $120 or more per window (Today's Homeowner, as of July 2026), and impact-rated or triple-pane glass pushes the number higher again.
Installation complexity and region add the rest of the spread. A second-story window needing scaffolding, a structural opening change, or high local labor rates all move the installed price up, independent of the window itself. Custom shapes, hardware finishes, and grille patterns inside the Signature collection add further cost on top of the base range. These factors apply across every brand, not just Marvin.
When Marvin is the right call.
Marvin earns its price on the wood and clad-wood collections. If the project is spec'd in real wood, or the look calls for a clad-wood exterior with a wood interior, there is no direct fiberglass or aluminum substitute that reads the same. The dealer network also matters for warranty service and parts once the windows are in the wall.
A regional builder with a long Marvin relationship has real switching cost built up in that dealer network, and stock availability on common sizes can beat a made-to-order timeline. If the spec calls for wood, or the project leans on that dealer relationship, buying Marvin is the straightforward answer, no matter what an aluminum quote comes in at.
The aluminum-spec alternative.
None of the above applies if the project is spec'd in aluminum rather than wood or clad-wood. Crateworks sources thermally-broken aluminum windows made to order, quoted with freight and customs itemized on the line, not buried in a dealer margin. There is no dealer or showroom layer between the quote and the factory floor.
That is worth comparing line for line against a Marvin quote only when the spec is aluminum to begin with. Marvin is not affiliated with, and does not endorse, Crateworks; every figure above comes from publicly published cost guides and Marvin's own collection pages, cited as of July 2026. A full spec-by-spec comparison and the current aluminum window lineup are available directly, and a project brief with your opening sizes gets a delivered quote.
Marvin's own site groups pricing by collection. Third-party cost guides then break each collection down further by window type and by installed vs. unit-only price. Both cuts, as published as of July 2026:
| Segment | Price per window, installed | Source (as of July 2026) |
|---|---|---|
| Essential collection (all-fiberglass) | $900 to $1,200 | Modernize |
| Elevate collection (wood interior, fiberglass exterior) | $1,000 to $2,400 | Modernize; Today's Homeowner |
| Signature collection (wood or aluminum-clad, premium) | $1,200 to $2,500+ | Modernize |
| Double-hung | $900 to $2,300 | HomeGuide |
| Casement | $900 to $2,100 | HomeGuide |
| Picture / fixed | $600 to $2,000 | HomeGuide |
| Sliding | $800 to $1,800 | HomeGuide |
| Unit only, before installation | $900 to $1,600 | Today's Homeowner |
Common questions.
- How much do Marvin windows cost per window?
- Marvin windows cost about $900 to $2,500 per window installed, with the range set by collection: Essential runs $900 to $1,200, Elevate $1,000 to $2,400, and Signature $1,200 to $2,500 and up (Modernize, as of July 2026). Unit-only pricing, before installation, is lower, around $900 to $1,600 (Today's Homeowner, as of July 2026).
- What is the difference between Marvin's Essential, Elevate, and Signature collections?
- Essential is built from fiberglass throughout and sits at the lowest price point. Elevate combines a wood interior with a fiberglass exterior. Signature is the premium tier, offering full wood or aluminum-clad-wood construction with the most configuration and finish options, and the widest price range of the three (Marvin, as of July 2026).
- Does the installed price include the window and the labor?
- Yes. The $900 to $2,500 range most guides quote is installed, meaning the window and the labor to put it in. The window alone, before installation, typically runs $900 to $1,600, and installation labor adds roughly $100 to $500 per window depending on size and access (Today's Homeowner, Modernize, as of July 2026).
- What is the cheapest Marvin window type?
- Picture and fixed windows tend to price lowest, from about $600 per window installed, because there is no operating hardware. Sliding windows run $800 to $1,800, double-hung $900 to $2,300, and casement $900 to $2,100, all depending on collection and size (HomeGuide, as of July 2026).
- Is there a cheaper option than Marvin for the same window spec?
- For a wood or clad-wood spec, no direct substitute matches Marvin's look. For an aluminum spec, Crateworks sources thermally-broken aluminum windows made to order at a delivered price, with no dealer markup layered in. Marvin is not affiliated with and does not endorse Crateworks; compare the two only when the underlying material spec is the same.
- Are Marvin windows worth the price?
- For a wood-frame or clad-wood project, or where a builder's dealer relationship carries real value on parts and warranty service, yes. For a project spec'd in aluminum rather than wood, the price gap is worth comparing against a factory-direct aluminum quote before committing, since the materials are not interchangeable to begin with.
Project in motion
Have an aluminum-spec project?
Send your opening sizes and we will quote thermally-broken aluminum direct, with freight and customs itemized on the line, so you can compare it line for line against a Marvin quote.