Custom laundry room with full-height cabinetry, a folding counter over front-loaders, and a utility sink. pending product photography

Built to your room

Laundry room cabinets

Custom laundry room cabinets built to your room, not pulled from stock widths. Base and wall cabinets, tall utility towers, a folding counter over the machines, a utility sink base, and built-in hampers, all in one run and one finish. Made to your measurements and shipped direct.

The range

Six cabinet types.

Base cabinets running the length of a laundry room under a continuous counter

Base cabinets

Cabinets under the counter for detergent, baskets, and bulk supplies, run the full length of the wall instead of stopping at a stock width.

Get a quote →
Upper wall cabinets and open shelving above a laundry counter

Wall cabinets

Upper cabinets and open shelving above the machines, sized to your ceiling height so the top shelf is still reachable and nothing is wasted.

Get a quote →
Floor-to-ceiling utility cabinet tower for brooms, vacuum, and cleaning supplies

Tall utility cabinets

Floor-to-ceiling towers for the vacuum, ironing board, broom, and cleaning supplies, closed off in one run rather than left in a corner.

Get a quote →
Folding counter running over front-loading machines in a laundry room

Folding counters

A continuous countertop over front-loaders, or a standalone folding station, in a surface built to take daily folding, spills, and detergent.

Get a quote →
Utility sink base cabinet built into a laundry cabinet run

Sink base units

A utility sink cabinet with a moisture-tolerant interior, plumbed into the run and finished to match the rest of the room.

Get a quote →
Pull-out hampers and a retractable drying rod built into a laundry cabinet

Hampers and drying

Pull-out hampers, tilt-out bins, and retractable drying rods built into the cabinet run, not bolted on after the fact.

Get a quote →

Built to a small or awkward room.

The usual reason to go custom is a room where stock widths leave dead gaps: a narrow wall, a sloped ceiling, a recess around the machines. Because every cabinet is built to your exact opening, that space gets used instead of boxed off, and the run reads as one continuous piece rather than a row of mismatched boxes.

Finishes that take daily use.

A laundry room sees moisture, detergent, and constant handling, so the finish does more work here than in a dry room. A baked-on or laminate finish over a moisture-tolerant core wipes clean and holds its edges. Any color is available, specified the way an architect calls it out on a drawing, with the whole run finished to match.

Common questions

Most laundry rooms use a mix: base cabinets under a counter, wall cabinets or open shelving above the machines, and at least one tall utility cabinet for the vacuum and ironing board. A folding counter over front-loaders and a utility sink base are common additions. Because each is built to your room, you only include the runs you actually have wall for.
Custom laundry cabinetry is priced by the run: the number of base, wall, and tall cabinets, the counter, and any sink base or pull-out fittings. Because Crateworks sources direct, the same built-to-fit run lands well under a showroom or designer markup. We give you an itemized quote against your measurements before anything is built.
A laundry room sees moisture, detergent, and daily handling, so the finish matters more than in a dry room. A baked-on or laminate finish over a moisture-tolerant core holds up to wiping and humidity without the paint chipping at the edges. Specify the color the way an architect calls it out, and the whole run is finished to match.
Yes. The most common reason to go custom is a small or awkward room where stock cabinet widths leave dead gaps. Each cabinet is built to your exact opening, so a narrow wall, a sloped ceiling, or a recess around the machines is used rather than boxed off.
Wall cabinets are usually set so the bottom shelf clears the machines and the counter, with the top shelf still in reach. The exact height is set to your ceiling and to whether you stack or sit the machines side by side, which is why a built-to-room run uses the wall better than a fixed stock height.
Built-to-order casework runs roughly 13 to 18 weeks from approved measurements and finish to delivery, since each cabinet is made for your room rather than pulled from stock. We confirm the timeline in writing before you commit.

Built to your room

Send your room measurements, get a price.

Tell us the wall lengths and which runs you need. We come back with an itemized quote for the cabinetry built to your room.

Request a quoteAll cabinets