A line-by-line interior finishing estimate with every figure removed: what comes back when you send your plans

A schedule at a grade, one order.

A defined builder-grade spec, quantities taken off your plans, every line in the finishing schedule delivered as one order on one date. Spec houses by the three, programmes by the hundred.Send your plans·See every line in the schedule

The other productDrawing every piece to its opening, one finish family through the house? That is Crateworks Custom.

What builder grade means here

Builder grade is a performance floor, not a materials list. The money goes on what the buyer touches and comes off what they never see. This is the standard we quote from unless your spec says otherwise, category by category.

Door and cabinet hardware

One finish family across every piece of metal a hand touches: Matte black
Required ANSI/BHMA grade, if the specification calls one out: Residential duty, grade unstated

Flooring

Which rooms are hard surface, which are carpet, which are tile: Hard surface throughout except tile in bathrooms; carpet excluded and stated as an exclusion
Hard surface product: SPC / rigid-core vinyl plank
Wear layer, in mils: 12 mil, builder spec
If engineered, veneer thickness: 2mm
Stairs, carpet or hard surface, and are the landings different from the flight: Hard surface, matching the field finish
Lay pattern and direction: Straight lay
Confirm every unit takes flooring from one production run: Yes, one run across all units
How many spare boxes to include: 2 boxes per product per unit

Countertops and vanity tops

Which tops are ours and which stay with the local fabricator: Vanity tops ours and kitchen local
Material, thickness, edge profile and overhang: 20mm, eased edge, 25mm overhang

Lighting

Colour temperature, one across the whole house: 3000K
One finish family across every fixture: Matte black
Which locations need IC-rated, damp-rated or wet-rated fixtures: IC-rated in all insulated ceilings, damp-rated in baths, wet-rated exterior and shower
Package or fixture-by-fixture: Fixture-by-fixture against the reflected ceiling plan
Dimming protocol, from the electrician: We ask you. It is on the quote before anything is drawn.
Ceiling height at every pendant, chandelier and stairwell location: We ask you. It is on the quote before anything is drawn.

Sanitary and plumbing fittings

One trim finish across every fitting: Matte black
Basin mounting: Undermount
Toilet rough-in distance, drain centres and supply locations per fixture: 12 inch toilet rough-in, standard centres

Cabinetry, millwork and closets

Door style: Shaker
Cabinet box material: Melamine / TFL
Box thickness, edge banding, drawer box and slide type, hinge type: Supplier standard, stated on the quote
Closet and wardrobe interiors: Melamine shelving
Who supplies cabinet pulls and knobs, and are they drilled before delivery: We supply, drilled in production
Door finish, as a code: We ask you. It is on the quote before anything is drawn.
Appliance model numbers, with cut sheets: We ask you. It is on the quote before anything is drawn.

Doors and trim follow the same rule. Slab or panel moulded interior doors, one style through the house, prehung and primed for site paint. Casing and base milled to your profile, the T100 flat profile shown here, casing and base the same section both ways. Levers, privacy sets and entry sets in one finish across the house.

Not this package

Natural stone and slab work
Glass screens and partitions
Built-in and arched millwork

Those are the custom product. Crateworks Custom draws them to the room.

What you get

One price for the whole schedule, line by line, back in five business days.
One delivery date, agreed in writing before anything is made.
Cabinetry, closets and doors to the grade above, quantities taken off your plans, one finish family across the house, arriving assembled rather than flat.
Countertops measured to the cabinets, so the tops turn up with the boxes instead of somebody coming back to template after the install.
23 of the 36 lines below in one order, and an honest mark against the rest, including the ones we cannot supply and why.

Where the saving is

The gap moves with the spec. Premium finishes save the most, because that is where local pricing is worst, and builder grade saves less. We will tell you which one you are looking at, in dollars against a published price, before you commit to anything.

Most of that gap is not in the lines you already price. It is in the ones you have not had quoted yet. Countertops, tile, the closet organisers, the mudroom lockers, the pantry and linen shelving all sit inside the package rather than turning up later as extras against a budget that has already been set.

Two more reasons, neither of them clever. It ships as one consignment, so several houses moving together carry the delivery once between them instead of each paying it alone. And one order, one schedule, one date means you stop paying for eight vendors to coordinate with each other, and for the weeks that go missing when they do not.

One house or a hundred

We have priced sets from one house to a hundred. The last three-house schedule ran to eighteen cabinetry and countertop lines, three flooring and tile lines and ten door and hardware lines. The hundred-house programme ran to twenty-three lines of doors, trim and hardware, each one priced individually.

On a programme, the sheet carries one column we care about more than our own: yours. Mark what each line costs you today. We move on the lines where it matters to you rather than take a flat cut across everything, and where you already buy better than we can, we hand that line back rather than argue about it.

Sample unit price list for a hundred-house programme: doors, mouldings and hardware line by line with quantities and units, the rate column removed, and a blank column for the builder's current rate.

Unit price list, hundred-house programmeOpen

Trim rate sheet, one profileOpen

Figures are removed from both samples. The priced sheets arrive with your quote.

Send us your plans and we will price the whole schedule in five business days.

Leave your details and we will come to you for the drawings. Or, if they are ready, send them now.

The schedule

Cabinetry, closets and doors come to the grade above, quantities off your plans. Everything else is bought to the spec on the plan.

Cabinetry and millwork

Kitchen cabinets, base and upper
In the package
Kitchen island, finished on all sides
In the package
Tall unit and refrigerator surround
In the package
Vanities, ensuite main and powder
In the package
Mudroom locker bays
In the package
Pantry shelving
In the package
Laundry cabinets over washer and dryer
In the package
Closet organisers, walk-in and reach-in
In the package
Linen unit
In the package

Countertops, tile and flooring

Kitchen countertops
On some jobs the kitchen run stays with a local fabricator. Confirmed per job.
Per job
Vanity tops
In the package
Floor tile
Porcelain tile carries no cert gate in this jurisdiction.
In the package
Wall tile and shower surround
Porcelain tile carries no cert gate in this jurisdiction.
In the package
Backsplash tile
Porcelain tile carries no cert gate in this jurisdiction.
In the package
Hard flooring, rigid core or engineered
In the package
Carpet
Sourced locally. Not a line we carry.
Not ours

Doors, trim and hardware

Interior doors, prehung
In the package
Bifold, barn and closet doors with track
In the package
Casing, base, stops and capping
Moulding profile bought by the linear foot. Different line than millwork, hence TRM-.
In the package
Levers, privacy sets and entry gripset
In the package
Cabinet pulls and knobs
In the package
Handrail and brackets
Finger-joint pine rail by the linear foot, brackets to match the levers.
In the package
Door stops, shims, coat hooks and shower rods
The small lines a production schedule carries and a spec house forgets.
In the package
Windows and exterior doors
Within the tested size envelope. Confirmed per opening before quoting.
Per job

Fixtures and fittings

Faucets, sinks, tubs and toilets
Supplied with certification for Canada and the US. Paperwork comes with the quote.
Per job
Light fixtures
Supplied with Canadian certification. Paperwork comes with the quote.
Per job
Switches, receptacles and plates
Electrician supplies. Not a line we carry.
Not ours
Appliances
Not a line we carry.
Not ours

Exterior

Siding panel
Active lane, CLD- prefix issued. No shipped job yet, so quoted case by case.
Per job
Trim coil, soffit and fascia
Same lane as siding panel. Quoted as one colour system with it.
Per job
Decking
Ships. Commodity line, no story.
In the package
Fencing
Ships. Commodity line, no story.
In the package

Site and labour

Installation and site work
Supply-only package. Your trades install.
Not ours
Paint
Not a line we carry.
Not ours
Railing and fireplace
Not a line we carry.
Not ours
Fasteners, adhesive, grout and setting materials
Site consumables. Not a line we carry.
Not ours

What comes back

Every line taken off your drawings with a quantity against it, what is included, what is not, and every assumption we had to make written down at the front instead of found later. Figures are removed from this sample.

Sample interior finishing estimate, showing every line item with quantities and units, the included and not-included lists, and the open assumptions. Prices removed.

Open the full sample

What is not included

Installation and site work, since this is a supply package and your trades install it. Carpet, paint, railing and fireplace. Fasteners, adhesive, grout and setting materials. Waste above the quantities listed. Anything marked Not ours above, and anything under Not this package.

Send your drawings and get the whole schedule back priced in five business days.

Send your plans

The delivery date is agreed in writing and there is money behind it: the terms are on the trade page.

The other product

Drawing every piece to its opening, one finish family through the house?

That is Crateworks Custom. Same company, a different product, its own page.