Black horizontal-slat aluminum privacy fence

Aluminum Fencing · Raleigh, North Carolina

Aluminum Fencing in Raleigh.

Powder-coated aluminum fencing and pool enclosures for new-construction and remodel yards across the Triangle, built to a spec that will not need repainting or replacing after one humid season.

In short

New subdivisions across Cary and Apex are gating pools and yards on a builder's default vinyl or a basic wrought-iron run, and both show real wear inside a few Carolina summers; Crateworks specs powder-coated aluminum built to outlast the whole subdivision's repaint cycle.

Built for Raleigh’s climate

In Raleigh's humidity, wood posts rot at the ground line, wrought iron rusts from the weld points out, and vinyl gets brittle enough to crack when a summer's heat gives way to one of the area's occasional hard freezes. Composite pickets fade under UV and sag over a long run. A lot of the fencing going in right now surrounds a new-construction pool or yard across fast-growing subdivisions in Cary and Apex, and pool enclosures there carry their own barrier height, gap spacing, and self-closing gate requirements set by the municipality, confirm those locally before finalizing a layout.

Climate zone
3A warm-humid
Best time to spec
year-round
What we plan for
humid summers, heavy rain, and occasional winter ice

Why it suits Raleigh

Powder-coated aluminum sidesteps all of it, it will not rot, rust, or warp, and the finish holds its color without a repaint cycle a new subdivision's HOA would otherwise be chasing every few years. Sourcing the whole run direct means pedestrian, pool, and driveway gates come in matching style and finish, so a new-construction property gates to match instead of a stock gate dropped into a custom fence line, and slope, corners, and gate placement get quoted to the actual lot rather than sold by the linear foot.

Container-direct delivery into the Raleigh-Durham Triangle.

How it ships to Raleigh: Freight lands at the Port of Wilmington or the Port of Virginia at Norfolk, then an overnight truck run into the Triangle.
Explore the full aluminum fencing range →

Explore the styles

Aluminum Fencing styles


How it works

  1. 01

    Send your scope

    Drawings, a materials list, or a rough idea. No account, no obligation. Just tell us what the project needs.

  2. 02

    We source & spec

    We match products to your climate and local code, then price them factory-direct from vetted suppliers, not off a distributor's shelf.

  3. 03

    One delivered quote

    The whole schedule comes back as a single coordinated quote, delivered to Raleigh. One order, one point of contact.


One source for the whole project

Building the whole backyard & outdoor living in Raleigh?


Common questions

It outlasts all three. Wood rots at the posts, wrought iron rusts at the welds, and vinyl turns brittle enough to crack when a summer's heat gives way to a hard freeze. Powder-coated aluminum does not rot, rust, or warp.
Height, gap spacing, and self-closing gate hardware requirements are set by your municipality. Confirm the specifics locally before we finalize your layout.
It is quoted that way by default. Slope, corners, and gate placement all change the spec, so we measure your actual lot rather than selling a fixed panel size.
Yes, whatever the entrance needs, sliding gates for tight driveways, cantilever and double-swing gates, folding gates, and matching pedestrian and pool gates all come in the same style and finish as the run.

Nearby: Atlanta · New York · Houston

Spec aluminum fencing for Raleigh.

Send drawings or a rough scope. We quote the Raleigh delivered price, all-in.