Black horizontal-slat aluminum privacy fence

Aluminum Fencing · Seattle, Washington

Aluminum Fencing in Seattle.

Powder-coated aluminum fencing for Seattle yards and pools, built to outlast wood, wrought iron, composite, and vinyl through a climate defined by sustained moisture.

In short

A wrought iron fence rusts faster in a climate that rarely dries out than in one with a real dry season to slow the process down, and aluminum simply does not carry that risk.

Built for Seattle’s climate

Wrought iron corrodes wherever its coating is compromised, and in a climate that stays damp for months at a time, that corrosion spreads faster than it would somewhere with a real dry season to interrupt it. Wood posts and pickets rot at ground contact and need refinishing to hold their color through repeated wet seasons, and moss and algae take hold on wood and composite surfaces here in a way drier climates rarely see. Composite panels can also sag over a long span once saturated, and vinyl can go brittle in a hard freeze on the rare year it happens. Aluminum does not rust, rot, grow moss, sag, or go brittle. Pool barrier height, gate self-closing, and self-latching requirements are set by your municipality, worth confirming early on the larger Eastside lots around Bellevue, before installing around any pool.

Climate zone
4C marine
Best time to spec
spring through fall
What we plan for
persistent rain, moisture, and mildew

Why it suits Seattle

Every other material on this list has a failure mode that shows up faster in a climate this wet, iron rusts, wood rots and grows moss, composite sags, vinyl goes brittle. Aluminum is the one that does not trade one weakness for another. Sourcing it factory-direct means the finish, panel style, and gate hardware are part of the same order. Sliding gates for tight driveways, cantilever gates where ground clearance matters, double-swing gates for wider openings, folding gates for reclaimed space, and pedestrian or pool gates are all built to match the run. Spec the run and gates together through /brief.

Container-direct delivery into the Greater Seattle area.

How it ships to Seattle: Freight lands at the Seattle and Tacoma ports of the Northwest Seaport Alliance, in the metro itself.
Explore the full aluminum fencing range →

Explore the styles

Aluminum Fencing styles


How it works

  1. 01

    Send your scope

    Drawings, a materials list, or a rough idea. No account, no obligation. Just tell us what the project needs.

  2. 02

    We source & spec

    We match products to your climate and local code, then price them factory-direct from vetted suppliers, not off a distributor's shelf.

  3. 03

    One delivered quote

    The whole schedule comes back as a single coordinated quote, delivered to Seattle. One order, one point of contact.


One source for the whole project

Building the whole backyard & outdoor living in Seattle?


Common questions

Sustained moisture accelerates rust in wrought iron, rot in wood, sag in composite, and brittleness in vinyl. Aluminum resists all of it and does not need a repaint cycle to keep doing so.
Barrier height, gap spacing, and self-closing gate hardware requirements are set by your municipality. Confirm the specifics locally before finalizing a layout.
Yes. Sliding gates for tight driveways, cantilever gates where ground clearance matters, double-swing gates for wider openings, folding gates for reclaimed space, and pedestrian or pool gates all come in the same style and finish as the run.
It can on wood or composite surfaces that stay damp for months. Aluminum's surface does not give moss the same foothold, which matters in a climate this consistently wet.

Nearby: San Jose · Denver · Los Angeles

Spec aluminum fencing for Seattle.

Send drawings or a rough scope. We quote the Seattle delivered price, all-in.