Types of Light Fixtures: A Room-by-Room Guide.

Light fixtures fall into a few families: ceiling fixtures that hang (chandeliers, cascades, linear suspensions and pendants), ceiling fixtures that sit close to the ceiling (flush and semi-flush mounts), wall fixtures (sconces) and lamps that stand on the floor or a table. Most rooms need more than one type, because one fixture lights the room and another lights the task. This guide covers each type, where it works and how to size it.

By Charles Lau · Updated November 8, 2026

A white cloud-shaped pendant over a kitchen counter with bar stools, in a bright room with tall windows
  • Hanging fixtures (chandeliers, cascades, linear suspensions, pendants) give a room its centerpiece and light over tables and islands.
  • Flush and semi-flush mounts light low ceilings, hallways and closets where a hanging fixture would be in the way.
  • Sconces light walls, stairs and vanities; floor and table lamps add light where people sit and read.
  • Size a chandelier by adding the room's length and width in feet; the total is the diameter in inches.

What are the main types of light fixtures?

Chandeliers hang from one point and spread light from several arms, shades or glass forms. Cascade chandeliers are a hanging group of drops at different heights, built for tall spaces such as two-story foyers and stairwells. Linear chandeliers, also called linear suspensions, run long and narrow over a dining table or kitchen island.

Pendants are single hanging fixtures, used alone over a bedside or a sink, or in a row over an island. Flush mounts sit tight to the ceiling and semi-flush mounts hang a few inches below it. Wall sconces mount on the wall beside a bed, a mirror, a doorway or a stair.

Floor lamps and table lamps are the movable layer. A floor lamp lights a reading chair or a corner; a table lamp lights a bedside, a console or a desk.

An arc floor lamp reaching over a sofa from the corner of a living room
Crest Floor Lamp, Crystal Block Base: an arc floor lamp lights the sofa from the corner.

Which light fixture goes in which room?

Entries and foyers take a chandelier sized to the space, or a cascade where the ceiling is two stories tall. Dining rooms take a chandelier or a linear piece over the table. Kitchens usually pair pendants or a linear piece over the island with ceiling lights for the rest of the room.

Living rooms mix a ceiling fixture with floor and table lamps. Bedrooms take a ceiling fixture or a small chandelier plus bedside lamps, pendants or sconces. Stairwells suit sconces along the wall or a long cascade through the opening.

Two brass tube wall sconces either side of a bed against a dark blue wall
Sedge Wall Sconce, Fluted Tube: a pair of sconces either side of the bed.

How bright should each room be?

Lighting levels are measured in foot-candles, where one foot-candle is one lumen spread over one square foot. The Illuminating Engineering Society's residential guidance, as summarized by Penn State, puts living rooms and bedrooms at 10 to 20 foot-candles, dining rooms and general kitchen lighting at 30 to 40, kitchen task areas at 50 to 100, bathrooms at 20 to 50, and hallways and entries at 5 to 20.

Our color temperature and lumens guide turns those levels into the lumens a room needs.


How do you size a chandelier or pendant?

Add the room's length and width in feet; the total is a good chandelier diameter in inches, so a 12 by 16 ft room takes a chandelier about 28 in across. For height, allow 2.5 to 3 in of fixture for every foot of ceiling. Our chandelier size calculator does both and shows pieces made near that size.

Over a kitchen island, pendants usually hang 30 to 36 in above the countertop under an 8 ft ceiling, spaced 24 to 30 in apart.


Can light fixtures be made to measure?

Yes. Crateworks makes chandeliers, pendants, sconces and lamps to your dimensions, in one finish family across the house, and quotes them with your project order, about 90 days, delivered. Our lighting pages are sorted by type and by room, and you can save pieces to a list or send a photo of a fixture you like with its measurements.

Have your own design? That is the ideal start. Send the drawing or a photo with the width and the height or drop, and we make it to that size and finish. The same goes for any fixture you do not see on our pages.

For hotels and restaurants, send the fixture schedule. Decorative pieces are made to drawing and repeated across the property in one finish. See commercial lighting.


Common questions.

What is the difference between a chandelier and a pendant?
A chandelier spreads light from several arms, shades or glass forms and anchors a room. A pendant is a single hanging fixture, used alone or in a row.
What is a cascade chandelier?
A group of glass or metal drops that hang at different heights from one canopy. It suits two-story foyers, stairwells and other tall spaces.
What light fixture is best for a low ceiling?
A flush or semi-flush mount, which sits at or just below the ceiling, plus wall sconces and lamps for the rest of the light.

Sources.


Keep reading.

Light the whole house in one finish

Browse every fixture type, save the pieces you like, or send a photo of a fixture with its measurements.