Frameless glass shower enclosure

Shower Doors · Edmonton, Alberta

Shower Doors in Edmonton.

Frameless tempered glass shower enclosures custom sized to your opening, for Edmonton homeowners and builders who don't want a standard stall dropped into a lower-level or river-valley bathroom the stock sizes were never built for.

In short

A walkout ensuite built into a Riverbend or Windermere river-valley lower level sits against a colder foundation wall for months at a time, and that colder wall edge is where condensation collects on a shower door first, not across the whole pane. Crateworks specs hardware and a factory-applied coating rated for that edge exposure, not a general humidity spec.

Built for Edmonton’s climate

Most of Edmonton's shower-glass problem isn't the room, it's the wall behind it. A walkout lower level dug into a river-valley lot in Riverbend or Windermere backs onto ground that stays cold well past the point the rest of the house has warmed for the season, and a shower enclosure mounted against that wall runs cooler at the frame edge than the rest of the glass. That's where condensation collects first and lingers longest, ahead of the general haze a dry heating season eventually adds everywhere else. A factory-applied coating and a frame profile that seals tight at the edge address that specific cold-wall exposure. Older Glenora bathrooms add a second wrinkle, decades of settling rarely leave the opening square, so the enclosure has to be built to the wall as it actually stands, not to a catalog width.

Climate zone
NBC Zone 7A (very cold)
Best time to spec
April to June
What we plan for
extreme cold and a short, intense build season

Why it suits Edmonton

Most of what we quote here is a non-standard cut for a specific wall condition, a lower-level enclosure set against a cold foundation wall, a neo-angle corner in an older Glenora bathroom, an alcove no stock kit was sized for. Factory-direct sourcing means that custom cut and the edge-sealed coating are a spec line, not a redesign fee. Send the alcove dimensions, wall type, and glass finish through /brief and the quote comes back built to that exact opening.

Container-direct delivery into Edmonton and central Alberta.

How it ships to Edmonton: Freight lands at the Port of Vancouver or Prince Rupert and rails north through CN's Edmonton yards.
Explore the full shower doors range →

Explore the range

Shower Doors types


How it works

  1. 01

    Send your scope

    Drawings, a materials list, or a rough idea. No account, no obligation. Just tell us what the project needs.

  2. 02

    We source & spec

    We match products to your climate and local code, then price them factory-direct from vetted suppliers, not off a distributor's shelf.

  3. 03

    One delivered quote

    The whole schedule comes back as a single coordinated quote, delivered to Edmonton. One order, one point of contact.


One source for the whole project

Building the whole bath in Edmonton?


Common questions

Generally yes. A lower-level enclosure in Riverbend or Windermere sits against a colder foundation wall for much of the year, and that's where condensation collects first, so we spec the coating and frame seal to that edge exposure specifically.
That's most of the work. A century of settling rarely leaves a bathroom wall square, and the enclosure is built to the wall as it actually measures, not selected from a stock width.
Corrosion-resistant hinges and clamps, specced for sustained contact with a cooler, damper wall edge rather than a general-purpose finish.
Usually not for a like-for-like replacement, but confirm with the City of Edmonton if the install changes plumbing or the framed opening.

Nearby: Calgary · Saskatchewan · Vancouver

Spec shower doors for Edmonton.

Send drawings or a rough scope. We quote the Edmonton delivered price, all-in.