The kitchen run, the stone counters and the island with its stools

What custom kitchen cabinets cost per linear foot, from published prices.

Custom kitchen cabinets run about $500 to $1,400 per linear foot installed, according to published cost guides. Semi-custom runs about $200 to $650 and stock about $150 to $300. Every figure below links to its source in our published benchmark, and every row says whether it includes installation, because that one detail explains most of the spread between quotes.

Updated

How much do custom cabinets cost per linear foot?

Installed, about $500 to $1,400 per linear foot for custom, $200 to $650 for semi-custom and $150 to $300 for stock. Those are the bands published cost guides give, collected in the Crateworks Retail Benchmark and captured 2026-11-10. Supply-only prices sit lower because install is a separate line.

Cabinet tier$/linear footBasis
Ready to assemble, flat-packAbout $100Supply only
Framed stock, mapleAbout $180Supply only
Stock$150 to $300Installed
Semi-custom$200 to $650Installed
Custom$500 to $1,400Installed
Custom, supplied$550 to $570Supply only, install $100 to $200 more
Luxury custom makersNot publishedQuote only

Source and confidence for every row: the benchmark. The two supply-only flat-pack and framed rows are retailers' own published prices for a 10 by 10 kitchen, divided by its cabinet footage (20 feet assumed where the seller does not list it). The installed bands are cost-guide estimates, and several of those guides cite each other, so treat them as one view of the market rather than three.

What does a 30-foot kitchen come to?

Using the installed bands above, 30 linear feet of cabinets works out to about $4,500 to $9,000 at stock, $6,000 to $19,500 at semi-custom and $15,000 to $42,000 at custom. These are straight multiplications. An island, tall pantry units, panelled appliances, inset doors and the countertops all move the real number.

If a cabinet allowance was set before the door style and finish were chosen, check it against these bands. An allowance written at stock prices and a kitchen chosen at custom spec can be tens of thousands of dollars apart, and that gap comes back later as a change order.

What is the difference between stock, semi-custom and custom?

Stock cabinets come in fixed sizes and a short list of finishes, and filler strips close the gaps. Semi-custom starts from a catalog but lets you change sizes, finishes and some details. Custom is built to your drawings, sized to the room rather than chosen from a catalog.

Custom is the tier that can carry inset doors, integrated appliance panels and one finish across the kitchen and the rest of the house, because each piece is drawn for the room.

Why do two cabinet quotes for the same kitchen differ so much?

Check three things before comparing: whether one includes installation and the other does not, whether they quote the same footage, and what the box and doors are made of. The supply-only prices in the table also leave out countertops, hardware and crown.

At the top of the market the comparison stops altogether. The luxury kitchen makers in the benchmark do not publish prices; you get a number only after a design consultation.

What does Crateworks charge?

Crateworks custom-builds cabinetry to your drawings as part of one order for the whole finish schedule: kitchen, vanities, closets, built-ins, doors and furniture in one finish family. We quote per project, priced line by line against published retail like the figures above, delivered in about 90 days.

For scale: a whole-home schedule of 147 linear feet of custom millwork runs $176,400 to $268,275 at published luxury retail. Crateworks builds the same spec for a fraction of that. See the schedule.

Send your drawings for a full line-item quote in 5 to 7 business days, or see trade terms for builders and designers.

For the rest of the room

Guides


More in kitchen cabinets

Common questions

About $500 to $1,400 per linear foot installed, according to published cost guides collected in the Crateworks Retail Benchmark (captured 2026-11-10). Semi-custom runs about $200 to $650 and stock about $150 to $300.
At the published installed bands, 30 linear feet of custom cabinets comes to about $15,000 to $42,000, before countertops. Islands, tall units, panelled appliances and inset doors push it higher.
It depends on the source, and it is the main reason quotes disagree. Installed prices include labour. Supply-only prices do not; for custom cabinets, published guides put install at about $100 to $200 per linear foot on top.
The supply-only prices on this page do not; countertops, hardware and crown are separate lines there. For an installed quote, ask what it includes before comparing it.
One foot of wall run that the cabinets occupy, measured along the wall. Add up each wall the cabinets run along to get your total.
About 90 days, delivered, as part of one order with the rest of the finish schedule.

Send the kitchen.

Floor plan or elevations, ceiling height, door style and finish, and the quote you are comparing against. Returns with a full line-item quote for the kitchen and anything else on the schedule.